Learn More About Alkaline Water, Water Ionizers, and more

Learn More About Alkaline Water, Water Ionizers, and more

About pH and ORP

What are pH and Oxidation Reduction Potential (ORP)? They are measurements of some of the most important properties of drinking water. Learn about how pH and ORP influence the quality of water, and what kind of water a water ionizer makes.

Acidity in the Body

The tissues and tissues of the body have varied pH levels, some are alkaline, and others are acidic. Some studies point to a link between acidity in the body and health problems. Learn about how acidity may affect the body.

Alkaline Water Benefits

Alkaline water is relatively new to the US; most of the research done on alkaline water benefits has been done in Japan. Learn about some of the most promising research, what it reveals, and what remains to be studied.

Bottled Water

Bottled water can cost up to 200x more than tap water and may actually be nothing more than filtered tap water! One study done by the Environmental Working Group found toxins in 10 popular brands of bottled water.

Proper Hydration

Learn about the three-step process that LIFE Ionizers uses to filter and ionize water. To make sure the water you get is as clean as possible; every LIFE Ionizer includes a free pre-filter which is configured based on the toxins we find in your local water quality report.

How Ionizers Work

Proper hydration is essential for good health. Get the facts on hydration including how much you should drink. Athletes benefit from proper hydration as well. Studies on hydration have shown that as little as 2% dehydration impairs athletic performance.

What is Acidic Water?

Acidic water has a pH of below 7. Acidic water is used externally, for hair and skin rather than consumed. Strong acidic water can be used to sanitize kitchen counters, cutting boards, and other surfaces.

What is Alkaline Water?

Alkaline water has been consumed in Asia for decades to improve health. Discover the facts about alkaline water based on the latest research, and learn what the Mayo Clinic has to say about it.

What is Ionized Water?

There are two kinds of ionized water; ionized alkaline water and ionized acidic water. De-ionized water has no minerals in it, and it can’t be ionized. It is made using distillation or reverse osmosis.

Micron Power Select™ allows you to vary the infrared output from each TheraMitter™ zone and control the infrared micron range during your sauna session. TheraMitters™ can be exclusively customized to a surface temperature between approximately 450°F down to an amazing 126°F. This is a extremely useful feature for multiple sauna users. For example, the person on the right can set their back TheraMitters™ on full power and their feet to half power while the person on the left can set their back TheraMitter™ to 80% power and their feet to 60% power. This highly innovative feature allows you to program your sauna to your personal comfort level. The MPS settings can be adjusted from 100% to 7% for each zone. On the MPS Touchview Control screen in "MPS SETUP," you can choose the level for each TheraMitter™. The levels can be set in any combination at 7%, 13%, 20%, 27%, 33%, 40%, 47%, 53%, 60%, 67%, 73%, 80%, 87%, 93%, or 100%.

The SpectraWave™ function is an exclusive feature that allows the sauna to move through a specific infrared spectrum. The sauna’s onboard computer system has 8 different pre-selected power settings and it will scroll through a new setting every 2 minutes. This feature allows TheraSauna® to produce near, middle, and far infrared energy when this feature is utilized. See below for some sample SpectraWave™ power settings:

TheraSaunas® far-infrared is produced during the entire sauna session.  When the sauna reaches temperature, the patented MPS Therasauna® Touchview™ 3.0 idles the TheraMitters™ down to surface temperature of under 230°F. The TheraMitters™ will return to 400°F and above when necessary, keeping a steady temperature and micron range. The far-infrared produced is still consistently reaching the optimal 9.4 micron range for human absorption due to the unique physical design of solid ceramic TheraMitters™, penetrating up to 2” below the skin. This creates an environment where the user receives more infrared in 20 minutes than they would during a 40 minute session in other brand saunas. Therasauna® produces zero cold spots when operating and does not vent plastics and carbon fibers  into the sauna cabinet, unlike our competitors. Carbon saunas only reach the one surface temperature of approximately 230°F and turn off after reaching their set convection air temperature, losing air temperature and creating an ineffective range of infrared. The TheraSauna® Stable Heat™ System does not turn off, but powers down and sends a trickle charge of electricty to maintain the surface temperature of the TheraMitters™, thus consistently reaching the 9.4 micron range of far infrared.

The best example of how TheraSauna's® Stable Heat™ System works in relation to our competitors is to imagine a light switch. If the light switch is flipped on, the light in the room will turn on. The moment the switch is turned off, the light goes out and the room is dark. Infrared is a form of light, just like the visible light in the example, but on a different spectrum that is invisible to the naked eye. TheraSauna's® Stable Heat™ System remains on during the entire sauna session, meaning infrared is produced the entire sauna session, just like turning on the light with the light switch and leaving it on the whole time you are in the room. In a competitor's sauna, the infrared will be produced until the set temperature is reached. The moment the set temperature is reached, infrared immediately stops being produced, just like shutting off the light with the light switch. No more infrared is being produced, just like flipping the light switch to off turns off the light. So, it's much like sitting in a room with the lights on for 40 minutes, but you have to sit in the dark for half of the time. Our Stable Heat™ System prevents this from happening in TheraSauna®, giving the user a clear advantage in the amount of exposure to far infrared.

This patented, 7 Day Programmable Control allows you to set the desired time your sauna will turn on Monday through Sunday. You can set the timer to pre-heat the sauna for you so that it is ready when you get home from work or when you wake up in the morning. Getting into a cold sauna and waiting for it to warm-up is a thing of the past. Just press, set and forget... the TheraSauna® will remember the rest. The onboard computer memory will hold the settings in memory even if the sauna experiences a power failure.